TM 10-6640-215-13 5-26.  REMOVE/INSTALL FREEZER (ICE CUBE MAKER). This task consists of: a. Removal b. Installation INITIAL SET-UP: Tools required General Mechanics Tool Kit, (Appendix B, Section III, Item 2) Material Required Lockwashers, (Appendix F) Equipment Condition Centrifuge removed (para.  4-46). ECU Remote Control Shelves removed (para 4-26). Personnel Required Two (2) General Safety Instructions WARNING ELECTRICAL SHOCK Before  performing  any  maintenance  actions  on  electrical  equipment,  ensure  all  electrical  power  has  been turned off.  Death or serious injury may occur from failure to do this. REMOVAL Remove Freezer.  See Figure 5-26. a. Unplug freezer from wall receptacle in mechanical room. b. Open cabinet doors D2 for access to freezer mounting bolts. c. Remove four mounting bolts, lockwashers, flat washers from bottom of counter top. WARNING The freezer is heavy.  To prevent injury, two people are required to remove freezer from counter top. d.   Remove freezer from counter top. INSTALLATION Install Freezer.  See Figure 5-26. WARNING The freezer is heavy.  To prevent injury, two people are required to remove freezer from counter top. a.   Position freezer on counter top. b.   Install four flat washers, lockwashers, and mounting bolts up through of counter top and into freezer. 5-52