TM 10-6640-215-13
SECTION II. SERVICE UPON RECEIPT
Alphabetical Index
Paragraph Title
Paragraph
General .........................................................................................................................................................
4-4
Inspecting and Preliminary Servicing of Equipment Upon Receipt..................................................................
4-5
4-4. GENERAL
When new, used or reconditioned equipment is first received, it is the responsibility of the person in charge to determine
whether the equipment has been properly prepared for service by the supplying organization and to be sure it is in
condition to perform its function. For this purpose, inspect all assemblies, subassemblies, and accessories to be sure
they are properly assembled, secure, clean and correctly adjusted and/or lubricated. Check all tools and equipment to be
sure every item is present, in good condition, clean and properly mounted or stowed.
4-5. INSPECTING AND PRELIMINARY SERVICING OF EQUIPMENT UPON RECEIPT. I
a.
General Procedures.
(1) Visually inspect the Petroleum Laboratory body exterior starting at the rear to cover rear, curbside,
roadside, front, top, and bottom. Inspect for damage, tears, breaks, or corrosion.
(2) Service Petroleum Laboratory exterior in accordance with TM 9-2330-362-14&P.
(3) Inspect and service the ECUs in accordance with TM 54120-371-14.
(4) Remove the overpack boxes.
(5) Enter Petroleum Laboratory and inspect for broken equipment or equipment loose and not secured.
(6)
Close doors/vents to determine if light leaks exist.
(7)
Inspect doors for damage, torn or rotted seals, and tightness of closure.
(8) Inspect interior for evidence of water damage, fungi, mildew, and corrosion.
(9) Inventory section contents against Components of End Item and Basic Issue Items Lists (Appendix C).
(10) Inventory consumable supplies contained in section as shown in Appendix E.
4-2
|
|
