TM 10-6640-215-13
3-5.
REMOVE/INSTALL PURGE INTAKE DOOR FILTERS-continued..
b.
Replace purge door .circle and fasten in place with four screws and lockwashers.
3-6.
REMOVE INSTALL PRESSURE RECORDING GAGE.
This task consists of:
a.
Removal
b.
Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit, (Appendix B, Section III, Item 2)
Equipment Conditions
All inputs to pressure gage disconnected.
REMOVAL
Remove Pressure Recording Gage. See figure 3-3.
a.
Remove three hex-head mounting bolts and carefully remove pressure recording gage from wall
mounts.
b.
Refer to T.M 10-6685-365-13&P for adjustment or repair procedures required for the pressure
recording gage.
INSTALLATION
Install Pressure Recording Gage.
a.
Align pressure recording gage with wall mounts.
b.
Fasten pressure recording gage to wall mounts with three hex-head bolts.
3-20
|
|
