TM 10-4930-251-12&P
(2) Disassembly\.
(,I)
Remove spring pin(10)and shaft(11 Figure
4-15).
(b)
Remove roll pins (8) and yokes (9).
(c)
Remove
spacer ( 12),.control
levers ( 13 and 14) and trip lever ( 15
)
frorn
container
(d)
Remove fuse nuts
16), adjusting
bolt (3) and nuts ( 17) from yokes (9).
14
13
No. 2
Position
12
No. I
Position
8
9
15
16
17
10
3
18
Figure 4-15
Control
Levers Assembly.
(3)
Repair.
WARNING
Dry cleaning
solvent
is used to clean parts and is potentially
hazardous
to personnel
and
property.
Clean parts in a well ventilated
area. Avoid
inhalation
of solvent fumes and
prolonged
exposure
to skin. Wash exposed skin thoroughly.
Do not use open flame or
excessive
heat. Flash point of solvent
is 100F
(38C
to 50C).
Wear eye protection
when blowing
solvent
from parts.
(a)
Clean all parts with dry cleaning
solvent and dry thoroughly.
(b)
Inspect all parts for wear and darnaue. Check levers and yokes for cracks or
breaks.
(c)
Replace all worn or damaged parts.
4-20
|
|
