TNI 10-4930-251-12&P
CHAPTER
4
UNIT MAINTENANCE
INSTRUCTIONS
Section 1. REPAIR
PARTS,
SPECIAL TOOLS,
AND EQUIPMENT
4-1. Tools and Equipment. Tools or equipment required for maintenance of tile unit can be
found in Appendix
B. Section III,Test,
Measurement
and Diagnostic
Equipment
or
support equipment to include standard test equipment
are found in any unit maintenance
shop.
4-2. Special Tools and Equipment.
There are no special tools and equipment
that are
required by the unit maintenance personnel for maintenance
of the unit.
4-3. Repair Parts List.
UnitMaintenance
Repair Parts and Equipment are listed in Appendix
F.
Section II.
SERVICE
UPON RECEIPT
4-4. Inspect Equipment.
a.
Inspect identification plates for positive Identification of equipment.
b.
Inspect the equipment for damage incurred during shipment. If the Equipment
has been
damaged, report the damage oil SF 364, Report of Discrepancy (ROD).
c.
Check equipment against packing list to make Sure all items are accounted for. Report all
discrepancies in accordance with DA PAM 738-750.
d.
Inspect components for loose or missing mounting
hardware and for loose connections.
4-5. Preliminary
Servicing and Installation
of Equipment.
a.
Servicing.
(1)
Lubricate
the Trailer in accordance with the instructions
in TM 9-2330-376-14&P.
(2)
Perform preventive maintenance checks and services (PMCS) as described in Table
4-1 and correct all
deficiencies.
b.
Installation.
The tank unit will
be used mounted oil skids and secured on a modified
Model M1061A1, 5-ton Trailer
.
(1)
Low\ Profile Tank Unit mounted on M1061A1,
5-ton Trailer. Detailed installation
procedures for the tie down kit and for mounting
the tank unit on the M1061A1
Trailer are
found in paragraph 4-10.
4-1
|
|