TM 10-3930-665-13&P
2-5 STARTING AND USING
Once the conveyor is positioned and setup in accordance with Section 24, operation may begin. Material can be placed on
the belt at any point, and removed from the belt at any point. However, material must be spaced to ensure no more than
45 lbs per ft is on the belt (when in horizontal position), or a max of 300 lbs when inclined.
WARNING:
IT IS IMPORTANT TO KEEP THE AREA IMMEDIATELY SURROUNDING THE
CONVEYOR
FREE
FROM
OBSTRUCTIONS
WHICH
MIGHT
ENDANGER
PERSONNEL.
When not in use, it is important to turn the conveyor off, this can be done by pressing the stop button at either end of the
machine, or moving the directional selector switch to off.
2-4
|
|
