| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-337-14
INSTALLATION (continued)
77. Using a 19/32- inch drill bit and mid-plate (35) as a template, center and drill two holes, marked O,
through hose trough, as shown.
78. Using a 27/64- inch drill bit and mid-plate (35) as a template, center and drill two holes, marked N,
through right front bracket assembly (30), as shown.
79. Use a 1/2-13 tap to thread through holes N in right front bracket assembly (30), as shown.
80. Remove all burrs and sharp edges. Finish all exposed metal areas using a rust inhibitor primer and paint
as specified in Table 7-4, Materials and Parts. Allow for the appropriate time for primer and paint to cure.
4-29
|
||
|
||
