| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-337-14
INSTALLATION (continued)
39. Using a 19/32- inch drill bit and rear shield plate (20) as a template, drill two holes, marked I, through
vehicle fender, as shown.
40. Using a 27/64- inch drill bit and rear shield plate (20) as a template, drill two holes, marked H, through left
rear bracket assembly (12) as shown. Use a 1/2-13 tap to thread through holes H in left rear bracket
assembly (12).
41. Remove all burrs and sharp edges. Finish all exposed metal areas using a rust inhibitor primer and paint
as specified in Table 7-4, Materials and Parts. Allow for the appropriate time for prime and paint to cure.
4-17
|
||
|
||
