| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-330-14&P-1
INITIAL INSTALLATION (continued)
31. Install center bracket B brace (31) on vehicle frame (32) with four flat washers (3), two
capscrews (9), and two self-locking nuts (2). Torque self-locking nuts to 55-65 lb-ft (75-88 Nm).
NOTE
Assistant will help with Steps 32 through 34.
32. Raise fender brackets (14) parallel to fender and hold while assistant tightens fender bracket
hardware. Torque self-locking nuts to 55-65 lb-ft (75-88 Nm).
33. Raise rib bracket A center brace (12) until armor panels are straight and even; use hydraulic
jack to lift armor paneling if necessary. Tighten all brace hardware. Torque self-locking nuts
to 55-65 lb-ft (75-88 Nm).
34. Tighten all armor panel and bracket hardware. Torque capscrews and self-locking nuts
to 55-65 lb-ft (75-88 Nm).
4-16
|
||
|
||
