TB 9-2330-330-14&P-1
INITIAL INSTALLATION (continued)
27. Install center bracket B brace (31) on filter center panel (24) with eight flat washers (3), four
capscrews (9), and four self-locking nuts (2). Do not fully tighten hardware.
28. Position center bracket B brace (31) on vehicle frame (32). Ensure brace seats flat on frame.
29. Mark hole position A on vehicle frame (32) using center bracket B brace (31) as a
template, as shown.
30. Using 19/32 drill bit, drill two holes through vehicle frame (32) in positions marked A. Ensure all
burrs and sharp edges are removed.
4-15