INITIAL INSTALLATION (Cont) - TB-9-2330-330-14-P-10065

Custom Search

Back
INITIAL INSTALLATION

Up
TB-9-2330-330-14-P-1 Tanker Ballistic Protectlion System (TBPS/AOA/FTSS) for Semitrailer Fuel Tanker 5000-Gallon Fuel Dispensing Automotive Manual

INITIAL INSTALLATION (Cont)

TB 9-2330-330-14&P-1

INITIAL INSTALLATION (continued)

2. Install belly panel (5) on semitrailer with four T-bolts (1), four flat washers (3), and four

self-locking nuts (2). Do not fully tighten hardware.

3. Install belly panel (5) on belly panel (4) with six capscrews (6), six lockwashers (7), and

six flat washers (3). Do not fully tighten hardware.

4. Tighten belly panel (4) and belly panel (5) hardware. Torque capscrews and self-locking nuts

to 55-65 lb-ft (75-88 Nm).

NOTE

A hydraulic jack may be needed to raise the engine compartment shroud

for hole alignment.

5. Install front bracket (8) on engine compartment shroud (10) with four flat washers (3), two

capscrews (9), and two self-locking nuts (2). Do not fully tighten hardware.

4-7