| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-330-14&P-1
VEHICLE PREPARATION (continued)
11. Remove two capscrews (25), two self-locking nuts (28), four flat washers (26), and ABS marker
light (27) from rear light bracket (29). Discard hardware.
12. Remove two capscrews (30), two self-locking nuts (32), four flat washers (31), and rear light
bracket (29) from tube canister bracket (33). Discard rear light bracket and hardware.
INITIAL INSTALLATION
WARNING
The armor plates of the Add-On-Armor (AOA) kit are heavy and
awkward. Two personnel are required at all times when installing the
armor plates on the semitrailer. Failure to do so may result in injury
to personnel or damage to equipment.
NOTE
Refer to Table 4-1, AOA Kit Contents List, for a list of all AOA kit
components.
1. Install belly panel (4) on semitrailer with four T-bolts (1), four flat washers (3), and four self-
locking nuts (2). Do not fully tighten hardware.
4-6
|
||
|
||
