Custom Search
 
  
 


TB 9-2330-330-14&P-1
VEHICLE PREPARATION (continued)
12. Remove self-locking nut (29), capscrew (26), two flat washers (31), and retaining strap (13) from
mounting bracket (12) and engine compartment (28). Discard hardware.
13. Remove remaining two self-locking nuts (29), two capscrews (26), four flat washers (31), and
mounting bracket (12) from crossmember (27) and engine compartment (28). Discard mounting
bracket and hardware.
14. Remove three self-locking nuts (41), three capscrews (38), six flat washers (39), and three
retaining straps (25) from mounting brackets (23) and fender (40). Discard hardware.
15. Remove four self-locking nuts (39), four capscrews (32), eight flat washers (33), and two
mounting brackets (23) from crossmember (36). Discard hardware.
16. Remove four self-locking nuts (42), four capscrews (35), eight flat washers (34), and two
mounting brackets (23) from fender. Discard hardware and mounting brackets.
3-5



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business