| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-330-14&P-1
VEHICLE PREPARATION (continued)
3.
Bend three clips (6) open and remove electrical conduit (5) from clips (6).
4.
Remove three clips (6) by grinding them smooth to surface of semitrailer.
5.
Bend six clips (7) open and remove two drain hose tubes (9) from clips (7).
6.
Remove six clips (7) by grinding them smooth to surface of semitrailer.
7.
Cut two drain hose tubes (8) approximately 4 to 5 inches (10 to 13 cm) from tanker body.
Ensure all sharp edges and burrs are removed. Discard drain tubes.
3-3
|
||
|
||
