| Tweet |
Custom Search
|
|
|
||
 TB 9-2320-273-13&P-1
CAB SUPPORT REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Personnel Required
Maintenance Level
Unit
Two
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanic's (Item 8, WP 0031 00)
(M915A1P1)
Shop Equipment, Common No. 1 (Item 6, WP 0031
Vehicle parked on level ground (TM 9-2320-283-
10)
Sling, Nylon (Item 7, WP 0031 00)
Parking/Emergency Brake applied (TM 9-2320-
283-10)
Lifting Device (4,000-lb capacity)
Engine off (TM 9-2320-283-10)
Block, Wood (2" x 4")
(M915P1, M916P1, M917P1, and M920P1)
Materials/Parts
Vehicle parked on level ground (TM 9-2320-273-
Rag, Wiping (Item 6, WP 0032 00)
10)
Locknut (2)
Parking/Emergency Brake applied (TM 9-2320-
273-10)
References
Engine off (TM 9-2320-273-10)
NOTE
The following procedure is for right cab support. Use same procedure for left cab support.
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
1.
Using lifting device, raise cab 2 - 2 1/2 in. and support with wood block.
|
||
|
||
