| Tweet |
Custom Search
|
|
|
||
 TB 9-2320-273-13&P-1
CLEANING BALLISTIC GLASS
THIS WORK PACKAGE COVERS
Cleaning
INITIAL SETUP
Equipment Conditions - Continued
Maintenance Level
Operator
(M915A1P1) - Continued
Parking/Emergency Brake applied (TM 9-2320-
Materials/Parts
283-10)
Detergent (Item 4, WP 0032 00)
Engine off (TM 9-2320-283-10)
Rag, Wiping (Item 6, WP 0032 00)
(M915P1, M916P1, M917P1, and M920P1)
Equipment Conditions
Vehicle parked on level ground (TM 9-2320-273-
10)
(M915A1P1)
Parking/Emergency Brake applied (TM 9-2320-
Vehicle parked on level ground (TM 9-2320-283-
273-10)
10)
Engine off (TM 9-2320-273-10)
CLEANING
CAUTION
Remove rings or other hard objects from hands before cleaning ballistic glass. DO NOT use hard, dirty
or gritty cloths on ballistic glass. DO NOT apply water or detergent unless ballistic glass is cool and is
protected from heating effects of sunlight. Failure to follow these instructions will damage ballistic
glass.
Do not use bug spray or other aerosol sprays on or near ballistic glass. Failure to follow these instruc-
tions will damage ballistic glass.
NOTE
Follow this procedure to clean inner plastic laminate surfaces of ballistic glass. Clean outside surfaces of
ballistic glass as you would clean plain glass.
1.
Add detergent to 1 gal. (3.8 L) of water as directed by manufacturer's label.
2.
Saturate a soft, clean cloth with cleaning solution and lightly rub plastic surfaces.
3.
Flush off cleaning solution with water and dry with a soft, clean cloth.
END OF WORK PACKAGE
|
||
|
||
