| Tweet |
Custom Search
|
|
|
||
 TB 9-2320-273-13&P-1
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Location
Item To
Check/
Item
Not Fully Mission
Service
No.
Interval
Procedure
Capable If:
NOTE
Perform PMCS for the M915A1 in TM 9-2320-283-10
BEFORE performing PMCS for the CPK.
Perform PMCS for the M915, M916, M917, and M920 in TM
9-2320-273-10 BEFORE performing PMCS for the CPK.
Review all WARNINGs, CAUTIONs, and NOTEs before per-
forming PMCS and operating the vehicle with CPK.
Perform all PMCS checks if:
a.
You are the assigned operator but have not operated the vehicle with
CPK since the last weekly checks.
b.
You are operating the vehicle with CPK for the first time.
Perform PMCS with vehicle parked on level ground, parking
brake applied, transmission in N (Neutral), wheels blocked, and
engine shut down.
FRONT AND
LEFT SIDE
a. Inspect wheel well armor for damaged, Armor plate is damaged,
1
Before
Front Armor
loose, or missing armor plate and mounting loose, or missing, or mount-
ing bolts are loose or miss-
bolts.
ing.
Armor plate is damaged,
b.Open left hood (M915A1P1: TM 9-2320-
loose, or missing, or mount-
283-10; M915P1, M916P1, M917P1, and
ing bolts are loose or miss-
M920P1: TM 9-2320-273-10) and inspect
ing.
exterior firewall armor for damaged, loose,
or missing armor plate and mounting bolts.
c. Inspect windshield ballistic glass mounting Any windshield ballistic
hardware for damaged, loose, or missing glass mounting hardware is
brackets and mounting bolts.
damaged, loose, or missing,
or mounting bolts are loose
or missing.
d.Inspect exterior surface of windshield bal- Cracks, scratches, or pitting
listic glass for cracks, scratches, or pitting. in the exterior layer of wind-
shield ballistic glass that pen-
etrates through to the inner
layer.
|
||
|
||
