Quantcast Exterior Handle, Rear Door

Custom Search
 
  
 


TM 9-2330-380-14&P
4-66. Exterior Handle, Rear Door
This task covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
EquipmentConditions:
General mechanic's tool kit (item 01, Appendix B)
Materials/Supplies:
Loctite (item 7, AppendixE)
a. Removal
1. Remove screw (1) securing exterior handle (2) on
shaft.
2. Remove handle (2) and outer preformed packing
(3).
3. Remove three rivets (4) and inner preformed
packing (3), escutcheon plate (5) and spacer (6).
b. Installation
1. Position spacer (6) inner preformed packing (3)
and escutcheon plate (5). Secure with three rivets
(4).
CAUTION
Over- torque of screw (1) will cause fracture of interior shear pin.
NOTE
Screw (1) must be coated with loctite prior to installation.
2. Apply loctite (item 7, Appendix E) to threads of screw (1). Secure handle (2) with screw (1) to torque
of 3-4 lb-ft (4.07-5.42 Nm).
Follow-on maintenance: None



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.