Quantcast INSTALLATION - TM-9-2330-329-14-P0304

Custom Search
 
  
 


TM 9-2330-329-14&P
BRAKE ACTUATING CAMSHAFT REPLACEMENT--Continued
0063 00
INSTALLATION
1.
Install lubrication fitting (15) to retainer bushing (16).
2.
Install two new O-rings (17), bushing bracket (18), retainer (16), four washers (14), new
lockwashers (13), and screws (12) to retainer bushing (19).
3.
Install washer (2), washer (3), and camshaft (1) through bracket (4) to bushing retainer (5) and
secure with four cap screws (6), washer (3), spacer (7), and new retaining ring (8).
4.
Install retainer bushing (19), spacer (11), washer (10), and snap ring (9) to camshaft (1).
5.
Lubricate per WP 0042 00.
FOLLOW-ON TASKS
1.
Install slack adjusters (WP 0066 00).
2.
Install brakeshoes (WP 0065 00).
3.
Install brakedrum (WP 0067 00).
4.
Install wheel assemblies (WP 0007 00).
5.
Remove jack stands from axles (WP 0007 00).
6.
Adjust brakes (WP 0066 00).
7.
Disconnect semitrailer grounding cables (WP 0007 00).
END OF TASK
0063 00-3/4 blank



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.