| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-329-14&P
ORGANIZATIONAL LUBRICATION INSTRUCTIONS
THIS WP COVERS:
Lubrication Instructions
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Organizational
Tool kit, general mechanic's (item 4, WP 0156 00)
Materials/Parts
References
Compound, cleaning (item 4, WP WP 0159 00)
DA PAM 738-750
Grease (item 8, WP 0159 00)
FM 9-207
Oil, lubrication (item 9, WP 0159 00)
TM 9-214
Rags (item 11 WP 0174 00)
TM 9-238
GENERAL
This WP contains lubrication instructions showing location, intervals, and proper materials for lubricating
the trailer. These instructions are mandatory.
The KEY lists lubricants to be used in all temperature ranges and shows the intervals.
DETAILED LUBRICATION INFORMATION
Clean lubrication points, grease fittings, and surrounding areas before applying lubricant.
Clean all lubrication points after lubricating to prevent accumulation of foreign matter.
Clean and lubricate bearings as specified in TM 9-214.
Maintain a record of vehicle lubrication and report any discrepancies noted during lubrication. Refer to DA
PAM 738-750 for maintenance forms and procedures to record and report any findings.
SPECIFIC LUBRICATION INSTRUCTIONS
Keep all lubricants in closed containers and store in a clean, dry place away from extreme heat. Keep
container covers clean and do not allow dirt, dust, or other foreign material to mix with lubricants.
WARNING
Wipe excess lubricant from area of brake shoe linings to avoid
grease from contacting linings. If brake shoe linings become
soaked with grease, replace them. Failure to follow this warning
may cause brakes to malfunction, resulting in serious injury or death.
0042 00-1
|
||
|
||
