Operation Under Usual Conditions (Cont)
Turn main breaker (5) on breaker box (6) to ON position.
Use extreme care when working around 120 VAC outlets.
Personnel may get electrocuted if 120 VAC outlet is
exposed to water. Failure to comply may result in injury
or death to personnel.
Refer to circuit directory on rear module door for desired
Turn desired breaker to ON position.
b. Stopping Hydraulic Generator.
All breakers must be turned off prior to turning main
breaker OFF. Failure to comply may result in damage to
Perform steps (1) through (4) to remove load from
Turn all breakers to OFF position.
Turn main breaker (5) on breaker box (6) to OFF position.
Close rear compartment door (para 2-101).
Stow rear work platform (para 2-105).