Intervehicular Cable Receptacles and Sockets

Custom Search

Back
Kingpin

Up
TM-9-8240 12-Ton 4-Wheel Wrecklerlow-Bed Semitrailers M9 M270 and M270A1 Manual

Landing Gear (Supports) Operating Handcrank

exclude dirt and moisture from the braking system and should

fitted

the

service

air

hose

coupling

and

emergency

air

hose coupling when these couplings are not connected by air

hoses to those of the towing vehicle.

27. Intervehicular Cable Receptacles and Sockets

Receptacle

A s s e m b l i e s (figs. 28 and 29). Each semitrailer

is equipped with a receptacle assembly for connection of the

intervehicular cable of a towing vehicle equipped with a 24-volt

electrical system. To connect the intervehicular cable, lift Up

the spring-loaded receptacle cover of the receptacle assembly

on the semitrailer and open the plug cover on the plug of the

Install the plug in the opening of the

intervehicular cable.

receptacle

and

rotate

the

plug

slightly

until

the

contacts

the

plug

are

alinement

with

their

mating

inserts

in the

Release

receptacle,

then

press

the

plug

into

the

receptacle.

the spring-loaded receptacle and plug covers.

b. Socket Assemblies (fig. 28). Semitrailers M270 and M269

are equipped with socket assemblies for connection of the

intervehicular cable of a towing vehicle equipped with either

To connect the inter-

a 6-volt or 12-volt electrical system.

vehicular

cable,

lift .up

spring-loaded

socket

cover

and

press

TAGO 1321B