| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-380-14&P
4-59. Landing Gear and Leveling Jack Braces (M129A4 Only) (cont'd)
c.
Inspection and replacement
Inspect parts cracks, dents, rust, corrosion or other damage. Repair or replace parts as required.
d. Installation
NOTE
Do step 1 if installing leg (19).
1. Position leg (19) and secure with eight
screws (16), washers (17) and nuts (18).
2. Position side brace (15) and secure with
screws (12), lock washers (13) and nuts
(14).
3. Position front brace (7) and secure with
screws (4), lock washers (5) and nuts
(6).
4. Position rear brace (11) and secure with
screws (8), lock washers (9) and nuts
(10).
5. Position sand plate (20) on front brace
(7) and secure with handle nut (21),
washer (23) and nut (24).
6. Connect chain assembly (22).
Follow-on maintenance:
Install sand plate.
Remove towing vehicle or blocking equipment.
4-113
|
||
|
||
