Tweet |
Custom Search
|
|
|
||
TM 9-2330-380-14&P
4-56. Rear Platform (M129A4 Only) (cont'd)
4. Remove two machine screws (19), flat washers (20), nuts (21) and two bumpers (22).
5. Remove eight screws (23) and flatwashers (24) securing brackets (25 and 26) to frame.
6. Remove four capscrews (27), flatwashers (28), nuts (29) and two mounting brackets (25).
7. Remove eight capscrews (30), flatwashers (31), self-locking nuts (32) and two angle brackets (26).
Discard self-locking nuts.
8. Lubricate in accordance with Appendix I, Lubrication Instructions.
9. Install two angle brackets (26), eight capscrews (30), flat washers (31) and new self-locking nuts (32).
10. Install two mounting brackets (25), four capscrews (27), flat washers (28) and nuts (29.)
11. Install eight screws (23) and flat washers (24) securing brackets (25 and 26).
12. Install two bumpers (22), two machine screws (19), flat washers (20) and nuts (21).
13. Install two brackets (18), eight capscrews (15), flat washers (16) and new self-locking nuts (17).
14. Install hinge bracket (8), machine bolt (12), new lock washer (13) and nut (14).
15. Install hinge (7), two machine bolts (9), flat washers (10) and new self-locking nuts (11).
4-105
|
||