Inspection - TM-9-2330-380-14-P0154

Custom Search

Back
Removal

Up
TM-9-2330-380-14-P Semitrailer Van: Electronic Tactical 12-Ton 4-Wheel XM1063 (NSN 2330-01-224-9244) and M129A4 (NSN 2330-01-372-5642) Manual

Air Reservoir

TM 9-2330-380-14&P

4-46. Brake Air Chamber (cont'd)

WARNING

Dry cleaning solvent (P-D-680) is toxic and flammable. Avoid prolonged breathing of vapors.Avoid

skin contact. Use only in a well-ventilated area. Keep away from open flame. Flash point of solvent

is 138o F (50o C).

2. Remove grease and oil with dry cleaning solvent (item 3, Appendix E) using a soft cloth (item 14,

e. Inspection

1. Inspect for loose, missing or damaged parts.

2. Inspect air chamber for cracks, dents, holes and warps.

3. Inspect for rust, corrosion and marred paint. Clean, treat, prime and paint as required.

4. Replace defective parts.

f. Installation

WARNING

If installing a new brake air chamber, make sure it is caged prior to installation. Failure to do so

could result in serious injury to personnel or damage to equipment.

NOTE

Apply teflon tape (item 12, Appendix E) to threads of air line connections before installation.

1. Position air chamber (10) and secure with two nuts (8) and washers (9).

2. Position yoke pin (7) and secure with cotter pin (6).

4-76