| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-331-14&P
0024 00
WIRING HARNESS REPAIR - Continued
FEMALE CONNECTOR REPAIR
1. Slide shell (9) and sleeve (10) back and cut terminal (11) from wire (8). Discard terminal.
2. Remove sleeve (10) and shell (9) from wire (8).
3. Strip insulation off wire (8) equal to depth of new terminal (11).
4. Slide shell (9) and sleeve (10) on wire (8).
5. Position new terminal (11) on wire (8) and crimp.
6. Slide sleeve (10) and shell (9) over terminal (11).
9
10
11
8
Figure 3. Female Connector
WIRE REPAIR
1. Locate damaged area in wire.
2. Cut wire in center of damaged area.
3. Strip insulation off wires approximately one inch from each cut end.
4. Twist ends of wire securely together, or crimp a splicing sleeve to both wire ends.
5. Cover repaired area with two layers of electrical tape.
FOLLOW-ON TASKS:
Connect towing vehicle electrical connector to semitrailer (WP 0007 00-2).
Check operation of lights.
END OF WORK PACKAGE
0024 00-2
|
||
|
||
