Tweet |
Custom Search
|
|
|
||
TM 9-2330-331-14&P
0019 00
Table 4. Organizational PMCS - Continued
ITEM TO BE
ITEM
MAN
EQUIPMENT
CHECKED OR
PROCEDURE
NO. INTERVAL HOUR
NOT READY/
SERVICED
AVAILABLE IF:
1.0
21
Triennially
Wheel Bearings
Clean, inspect, and repack inner and
(Rollers)
outer cones and rollers according to
worn.
NOTE
This should be checked every
36,000 miles or triennially,
whichever period is shorter.
Seals
Triennially
1.0
22
Check condition of seals for indicators of
Seal is damaged,
problems. When seal is removed, it
worn, or leaking.
should be replaced when possible. If
available, use correct seal installation
tool to drive/seat seal.
NOTE
This should be checked
every 36,000 miles or
triennially, whichever period
is shorter.
Spindle
.75
Spindle is
Triennially
23
a. Check spindle for damaged threads
damaged. Notify
and surface area for rust/pitting.
Direct Support
maintenance.
b. Lubricate according to WP 0022 00-4.
NOTE
This should be checked
every 36,000 miles or
triennially, whichever period
is shorter.
0019 00-14
|
||