| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
8.
Install new gasket (21) and plug (25).
NOTE
Step 10 is not required unless screen was removed.
9.
Install screen (20), nuts (18), and screws (19).
CAUTION
Seal must be installed with the seal flange toward the valve body to avoid leakage.
10.
Install new seal (13) and o-ring (12) in body (15).
11.
Install new quad-ring (3) and new wipe ring (2) on bonnet (6).
12.
Hold spring pin while screwing housing (1) onto bonnet (6).
13.
Install new o-ring (7) in bonnet (6).
CAUTION
Do NOT drop piston while installing it.
14.
Install spring (10) and piston (11).
15.
Hold spring pin (9) and attach rod (14).
16.
Rotate the bonnet (6) slightly in either direction and push it on the body (15).
17.
Install six screws (4) and washers (5) on the bonnet (6).
EMERGENCY VALVE MAINTENANCE--Continued
INSTALLATION
1.
Place push rod (20) and new gasket (22) to internal valve (21).
NOTE
Have an assistant guide top of push rod into vent valve at top of tank.
Apply antiseize compound to threads.
0130 00-9
|
||
|
||
