| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
3.
Hold spring pin (9) and remove rod (14) by unscrewing it.
CAUTION
Do NOT drop piston while removing it.
4.
Remove piston (11) and spring (10).
5.
Remove o-ring (7) from bonnet (6). Discard o-ring.
6.
Hold spring pin (9) while unscrewing housing (1). Remove housing (1) from bonnet (6).
7.
Remove wipe ring (2) and quad-ring (3) from bonnet (6). Discard wipe ring and quad-ring.
8
Remove o-ring (12) and seal (13) from body (15). Discard o-ring and seal.
NOTE
Step 9 is not required unless screen is damaged.
9.
Remove screws (14), nuts (18), and screen (20).
NOTE
Step 10 is only required if plug is leaking.
10.
Remove plug (25) and gasket (21) from bonnet (6). Discard gasket.
11.
Unscrew pilot valve (22) and gasket (21) from bonnet (6). Discard gasket.
EMERGENCY VALVE MAINTENANCE--Continued
12.
Remove o-ring (26). Discard o-ring.
13.
Remove screw (33), nut (28), and pull lever (32) from valve assembly.
14.
Remove bushing (30), o-ring (29), and quad-ring (31) from valve. Discard o-ring and quad-ring.
15.
Rotate shaft assembly (36) counter-clockwise to line up pins on shaft assembly to allow it to be
0130 00-5
|
||
|
||
