| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
STARTER REPLACEMENT--Continued
0119 00
2.
Remove nut (8), washer (9), lockwasher (10), and wire (7) from solenoid (6). Discard lockwasher.
3.
Remove screw (12) and electrical connector (13) from solenoid start terminal (6).
4.
Remove two nuts (14), lockwashers (15), and starter (11) from studs (16). Discard lockwashers.
INSTALLATION
1.
Install starter (11), two new lockwashers (15), and nuts (14) to studs (16).
2.
Install electrical connector (13) and screw (12) to solenoid (6).
3.
Install wire (7), new lockwasher (10), washer (9), and nut (8) to solenoid start terminal (6).
4.
Install shroud (1), two bolts (5), four washers (4), and two new self-locking nuts (3) to bracket (2).
0119 00-2
|
||
|
||
