Tweet |
Custom Search
|
|
|
||
TM 9-2330-330-14&P
ALTERNATOR AND MOUNTING BRACKET MAINTENANCE--Continued
0116 00
INSTALLATION
1.
Install mounting bracket (12), bottom bracket of alternator guard (16), two bolts (11), six washers
(10), and two new self-locking nuts (9) to alternator (4). Do not tighten.
2.
Install alternator (4), mounting bracket (12), three new lockwashers (18), washers (19), and bolts
(17) to intermediate housing (20).
3.
Install top bracket of alternator guard (16), alternator (4), new self-locking nut (6), two washers (7),
and bolt (5) to adjuster arm (8). Do not tighten.
4.
Push alternator (4) toward engine (13) far enough to allow belt (15) to be installed on pulley (14).
5.
Pull alternator (4) from engine (13) to apply tension to belt (15), and hand tighten nut (6) to adjuster
arm (8) so alternator remains in place.
0116 00-3
|
||