| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
ENGINE OIL FILTER AND OIL PRESSURE SWITCH REPLACEMENT--Continued
0104 00
ENGINE OIL FILTER INSTALLATION
1.
Coat gasket of new oil filter (1) with clean engine oil.
2.
Install new oil filter (1) to oil filter head (2) until contact is made and tighten an additional 1/4 turn.
OIL PRESSURE SWITCH REMOVAL
1.
Remove two screws (4) and disconnect wires (5) from oil pressure switch (3).
2.
Remove bolt (1), two seals (2), and oil pressure switch (3) from oil filter head (6). Discard seals.
0104 00-2
|
||
|
||
