| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
BRAKE INTERLOCK VALVES MAINTENANCE--Continued
0072 00
INSTALLATION
1.
Install brake interlock valve (6), two new lockwashers (3), and screws (2) to bottom loading
valve (5).
NOTE
Apply thread sealing compound to threads of fittings.
2.
Install three fittings (4) to brake interlock valve (6) and connect three lines (1).
TEST
1.
With prime mover connected (refer to WP 0007 00) and brake interlock valve (6) applied, coat
fittings (4) and connections on brake interlock valve (6) with soapy water.
2.
Inspect fittings (4) and brake interlock valve (6) for leakage, indicated by bubbles.
3.
If leakage is found at fittings (4), tighten fittings.
4.
If leakage is found at plunger (7), replace brake interlock valve (6).
FOLLOW-ON TASK
Disconnect semitrailer grounding cables (WP 0007 00).
END OF TASK
0072 00-2
|
||
|
||
