Custom Search
 
  
 


TM 9-2330-330-14&P
HUBS, BRAKEDRUMS, AND ABS SENSOR MAINTENANCE--Continued
0068 00
REMOVAL
1.
Slide brakedrum (1) off hub (11).
NOTE
If performing brake system maintenance only, stop here.
2.
Remove six bolts (2), lockwashers (3), hubcap (4), and gasket (5) from hub (11). Discard
lockwashers and gasket.
3.
Remove outer bearing nut (6), lockring (7), and inner wheel nut (8) from spindle (15).
4.
Remove outer wheel bearing (9) from outer wheel bearing cup (10), and slide hub (11) off
spindle (15).
5.
Remove seal (14), inner wheel bearing (13), and cup (12) from hub (11). Discard seal.
6.
Remove wheel studs (16) if necessary.
7.
Remove sensor (17) and sensor clip (18) from mounting block (19). Discard sensor clip.
0068 00-2



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business