| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
ORGANIZATIONAL PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)--Continued
0043 00
Table 1. Organizational PMCS--Continued.
PROCEDURE
NOT FULLY
ITEM NO.
INTERVAL
ITEM TO BE
MISSION
INSPECTED
CAPABLE IF:
7--Continued
Semiannual Brakes
g.
Lubricate brake shoe roller
and brake anchor pin (refer
to WP 0067 00).
8
Semiannual Batteries
Check electrolyte specific gravity.
Replace batteries if necessary.
9
Annual
Towing
Inspect condition of upper coupler
Connections
plate and spacer. Plate/spacer
should be replaced (refer to WP
conditions exist:
a.
Wear of 0.063 in. (1.60 mm)
or more over 1/4 of the
circumference of kingpin.
This would be a condition of
uneven wear on one or more
sides of the kingpin wear
surface.
b.
Even wear over kingpin
surface causing the diameter
to be reduced by 0.063 in.
(1.60 mm) or more.
Any cracks are
c.
A crack of any size noted
anywhere on or in associated evident.
welds.
d.
A nick, chip, or gouge deeper
than 0.125 in. (3.18 mm)
noted anywhere on wear
surface of kingpin.
10
Semitrailer does
Annual
Vapor Integrity
Notify Direct Support to perform
not pass test.
Test
test.
0043 00-7
|
||
|
||
