Custom Search
 
  
 


TM 9-2330-329-14&P
4-INCH PUMP MAINTENANCE--Continued
0146 00
8.
Remove seal (27) from bearing cap (28). Discard seal.
9.
Remove snap ring (31) and two bearings (32) from impeller shaft (33).
NOTE
Remove wear plate only if excessive wear is evident
and replacement is necessary.
10.
Remove two nuts (14), lockwashers (15), and wear plate (20) from volute (18). Discard
11.
Remove eight studs (19) from volute (18).
12.
Remove three plugs (16, 17, and 26).
0146 00-5



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business