Tweet |
Custom Search
|
|
|
||
TM 9-2330-329-14&P
ALTERNATOR MAINTENANCE--Continued
0145 00
4.
Install fan (26), pulley (29), washer (28), and new self-locking nut (27). Tighten nut 70 to 80 lb-ft
(95 to 108 Nm).
5.
Install new bearing (25) into rear housing (4).
6.
Install three connectors (23) to studs (22) on heat sink bridge (24).
0145 00-7
|
||