| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-329-14&P
EMERGENCY VALVE MAINTENANCE--Continued
0119 00
REMOVAL
NOTE
Place suitable container under emergency valve prior to removal.
1.
Remove two nuts (13), fuse plate (16), reinforcing plate (17) U-bolt (14), and cable (15) from
lever (1).
2.
Remove fitting (10), and cable (15) from cable support (11).
3.
Remove split coupling (7), two bolts (5), nuts (6), and seal (8) from pipe (9). Discard seal.
CAUTION
Assistance may be necessary when removing elbow and emergency valve.
Elbow and emergency valve may not come down together. If they do not
pressure MUST be applied to keep the emergency valve in place until it is
removed.
4.
Remove eight self-locking nuts (2), washers (3), and elbow (12) from studs (4). Discard
self-locking nuts.
0119 00-2
|
||
|
||
