| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-329-14&P
REFLECTORS REPLACEMENT--Continued
0094 00
INSTALLATION
WARNING
Solvents can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in a well-ventilated
area. If solvent gets on skin and clothing, wash immediately
with soap and water.
1.
Remove any residual dirt or grit from area where reflector is to be installed using cleaning
compound. Surface must be clean and dry before installing reflector.
2.
Remove protective backing from new reflector (1) and position on semitrailer.
3.
Use a clean dry rag, press down reflector (1), and smooth away any air bubbles.
FOLLOW-ON TASK
Disconnect semitrailer grounding cables (WP 0007 00).
END OF TASK
0094 00-2
|
||
|
||
