| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-329-14&P
SLACK ADJUSTERS MAINTENANCE--Continued
0066 00
REMOVAL
1.
Loosen brake actuator push-rod jamnut (4). Loosen yoke adapter (3) until it is free of yoke (2).
NOTE
More torque is required to rotate slack adjuster manual
adjustment hex counterclockwise than is necessary to
rotate it clockwise. Torque may be as high as
70 lb-ft (94.9 Nm).
2.
Rotate slack adjuster manual adjustment hex (9) counterclockwise until slack adjuster (6) is clear of
brake actuator push rod (5).
3.
Remove retaining ring (8) from recess on end of camshaft (7). Discard retaining ring.
4.
Using soft-faced hammer, tap on slack adjuster (6) lightly until it can be removed from camshaft (7).
5.
Remove two cotter pins (1 and 14), yoke pin (11), link pin (12), two washers (10 and 13), and
yoke (2) from slack adjuster (6). Discard cotter pins.
0066 00-2
|
||
|
||
