Custom Search
 
  
 


TM 9-2330-329-14&P
HUBS, BRAKEDRUMS, AND ABS SENSOR MAINTENANCE--Continued
0065 00
11.
Install outer bearing nut (6) and tighten to 250 to 400 lb-ft (339 to 542 Nm).
12.
Apply light coat of grease on new gasket (5) and position gasket on hub (11).
13.
Install hubcap (4), six new lockwashers (3), and bolts (2) to hub (11).
NOTE
Coat sensor with grease prior to installation.
14.
Install sensor (17), sensor cable (22), and new grommet (20) through dust shield (25) and axle
flange (24).
15.
Install new sensor clip (18) and sensor (17) to mounting block (19).
NOTE
Push sensor through mounting block as far as possible
or until sensor contacts toothed wheel hub.
16.
Install brakedrum (1) to hub (11).
17.
Secure sensor cable (22) to axle (21) with cable ties (23) as required.
18.
Connect sensor cable to ECU (refer to WP 0067 00).
0065 00-5



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business