Custom Search
 
  
 


TM 9-2330-329-14&P
OPERATION UNDER USUAL CONDITIONS--Continued
0007 00
I.
SPARE TIRE DISMOUNTING
Dismounting
1.
Remove two nuts (6) and reinforcement channel (5) from studs (7).
2.
Remove two quick release pins (2) from ladder (8) and carrier assembly (1).
WARNING
Spare tire and ladder are heavy. Make sure cable is not
frayed or damaged. Do not raise spare tire and ladder past
the vertical position or they will slam into carrier assembly.
Failure to heed this warning may result in severe injury to
personnel or damage to equipment.
3.
Rotate winch handle (9) until cable (3) is tight, then rotate winch handle (9) 1-1/2 turns in opposite
direction.
4.
Push spare tire (4) and ladder (8) away from carrier assembly (1) until supported by cable (3).
5.
Rotate winch handle (9) until spare tire (4) and ladder (8) are fully lowered to ground and cable (3)
is slack.
6.
Unhook cable (3) from ladder (8) and remove cable (3) from spare tire (4). Roll spare tire (4) off
ladder (8).
0007 00-24



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business