EXPLANATION OF CROSS-REFERENCE INDEXES WORK PACKAGES FORMAT AND COLUMNS

Custom Search

Back
DESCRIPTION AND USEABLE ON CODE (UOC) (Column (6)).

Up
TM-9-2330-326-14-P Semitrailer Tactical Drop Deck BreakBulk/Container Transporter 22-1/2 TON M871A3NSN 2330-01-458-6865 Manual

Figure 1. Blackout light

TM 9-2330-326-14&P

EXPLANATION OF CROSS-REFERENCE INDEXES WORK PACKAGES FORMAT AND COLUMNS

1. National Stock Number (NSN) Index Work Package.

STOCK NUMBER Column. This column lists the NSN in National item identification number (NIIN)

sequence. The NIIN consists of the last nine digits of the NSN.

NSN

When using this column to locate an

(e.g., 5385-01-574-1476)

item, ignore the first four digits of the

NIIN

NSN. However the complete NSN

should be used when ordering items by stock number.

FIG. Column. This column lists the number of the figure where the item is identified/located. The figures

are in numerical order in the repair parts list and special tools list work packages.

ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG.

column. This item is also identified by the NSN listed on the same line.

2. Part Number (P/N) Index Work Package. P/Ns in this index are listed in ascending alphanumeric

sequence (vertical arrangement of letter and number combinations which places the first letter or digit

of each group in order A through Z, followed by the numbers 0 through 9 and each following letter or

digit in like order).

PART NUMBER Column. Indicates the P/N assigned to the item.

FIG. Column. This column lists the number of the figure where the item is identified/located in the repair

parts list and special tools list work packages.

ITEM Column. The item number is the number assigned to the item as it appears in the figure referenced

in the adjacent figure number column.

SPECIAL INFORMATION

UOC. The UOC appears in the lower left corner of the Description Column heading. Useable on codes are

shown as "UOC: ..." in the Description Column (justified left) on the first line under the applicable

item/nomenclature. Uncoded items are applicable to all models. Identification of the UOCs used in the

RPSTL are:

Code

Used On

DLH

M871A3

Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material

functional group of this RPSTL. Part numbers for bulk materials are also referenced in the Description

Column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions

for items source coded to be manufactured or fabricated are found in Appendix (x) of this manual.

Index Numbers. Items which have the word BULK in the figure column will have an index number shown

in the item number column. This index number is a cross-reference between the NSN / P/N index work

packages and the bulk material list in the repair parts list work package.

NOTE

The Princeton, Kentucky fontaine Plant is the order

entry point for M871A3 parts support. For parts inquiries

call (270) 365-1177 0r (877) 462-3866. This Plant's CAGEC

is: 3DGR3.

I-5