| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-326-14&P
H-4. WOOD DECKING (Cont.)
Fontaine Trailers 1-3/8 x 96 x 41' -0" MIL #M871A3 (Cont.)
The following part numbers are for the M871A3 decking only. The deck boards are Apitong, single
length RLT.
The CAGE to be used for this decking is: 8N013 (Overseas Hardware Co.).
Secondary reference CAGE is: OFBD6 (Fontaine Trailer Co.).
P/N
BOARD
BOARD
QUANTITY
LENGTH
M871A3-A
1
41' 0"
M871A3-B
1
41' 0"
M871A3-D
1
41' 0"
M871A3-E
1
41' 0"
M871A3-F
1
41' 0"
M871A3-G
1
41' 0"
M871A3-H
1
41' 0"
M871A3-J
1
41' 0"
M871A3-K
1
41' 0"
Total 9 boards
NOTE
The 41' 0" long boards are for both upper and lower decks on the
semitrailer. The single length boards must be cut, approximately 10 feet
for the upper deck and approximately 31 feet for the lower deck. Measure
twice and cut once.
Deck screws are not part of deck kit and must be ordered separately.
The kit and boards are apitong and do not require pressure treatment.
Unless specified, they are shipped without pressure treatment. Each
board is proof load tested for safe working stress.
If you encounter any problems in shipping or installation, the
manufacturer--Overseas Hardwoods Company, Mobile, Alabama--
can be reached at 800-999-7616, FAX: 334-457-7633, email:
chuck@overseashardwoods.com.
Treating the apitong flooring on an annual basis with boiled linseed
oil or a UV wood preservative will increase the life of the decking.
The preservative should be applied by spraying it on or with the use
of a roller. It takes approximately 4 5 gallons for good coverage of
the decking.
H-14
|
||
|
||
