| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-326-14&P
b. Installation.
1.
Install two lanyards (13) into landing leg (1) using two new pop rivets (14).
2.
Install front shoe assembly (10) to rear shoe assembly (15) using two hitch pins (17), washers
(16), ties (11) and pins (12).
3.
Install shoe assembly to landing leg (1) using pin (9), hex screw (18), and new self-locking nut (6).
4.
Install landing leg (1) onto landing leg upper bracket using 10 bolts (20) and new locknuts (19).
5.
Install landing leg (1) onto landing leg lower bracket using two bolts (8) and new locknuts (19).
6.
Install landing leg (1) onto cross drive shaft (3) using bolt (2) and new self-locking nut (6).
7.
Repeat steps 16 for remaining landing leg.
8.
Install landing leg crank (7) onto landing leg (1) using bolt (4), two washers (5), and new self-
locking nut (6).
6-66
|
||
|
||
