| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-326-14&P
b. Installation.
1.
Drive two new bushings (6) into spider.
2.
Lightly lube and install two new anchor pins (7) into bushings (6).
3.
Place upper shoe and lining (2) in position on top anchor pin (7).
CAUTION
Install new anchor pins (11), retainers (12), and springs (3 and 4) at
each shoe and lining replacement.
4.
Hold lower shoe and lining (2) against bottom anchor pin (7) and install two retainer springs (4).
5.
Swing free end of lower shoe and lining (2) to S-cam, pull shoe and lining up, and install return
spring (3) on both shoe and lining (2) pins.
6.
Install roller retainer (12) on bottom roller (11).
7.
Install S-cam end of lower shoe and lining (2) down.
8.
Squeeze sides of roller retainer (12) together so it fits between lower shoe and lining (2) webs.
Position bottom roller (11) on webs and push roller retainer (12) between shoe and lining webs
until it locks into web holes.
9.
Install roller retainer (12) on top roller (11).
10. Pull S-cam end of upper shoe and lining (2) up.
11. Squeeze sides of roller retainer (12) together so it fits between upper shoe and lining webs.
Position top roller (11) on webs and push roller retainer (12) between shoe and lining webs.
12. Adjust automatic slack adjusters as required manually.
6-25
|
||
|
||
