| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-326-14&P
Table 3-1. Operator/Crew PMCS (Cont.).
ITEM
ITEM TO
EQUIPMENT NOT
INTERVAL
NO.
CHECK/SERVICE
PROCEDURE
READY/AVAILABLE IF:
NOTE
Check for lose plug-in connectors.
Make sure there is no debris
between plug and connector and
then make sure that plug-in is
seated.
Mission
requirements,
urgency,
safety, and common sense should be
considered in determining NMC
status of the semitrailer.
7
Before
Lights
Connect intervehicular cable from tractor to
Lights are damaged, do not
semitrailer. Check lights for damage, proper
operate, or missing
operation, presence, and missing hardware.
hardware. NMC if required
Notify Unit maintenance if there are problems in
for mission.
operation or damage is present.
8
Before
Look for presence, damage, and missing
Reflectors are missing and
hardware.
required for mission.
NOTE
Tractor must be coupled
before
checking ABS warning light.
ABS warning light should not stay
on when semitrailer is moving
above 4 mph (6.4 km/h).
If mission requirements do not allow for
troubleshooting of ABS system, continue
on with mission until system can be
properly diagnosed by Unit maintenance.
Only modulation will be affected not
stopping capacity of brake system.
9
Before
ABS Warning Light
Visually check that ABS warning light does not
ABS light does not come
stay on. Notify Unit maintenance.
on or stays on.
3-5
|
||
|
||
