TM 10-6640-239-13
C-1
APPENDIX C
COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LIST
Section I. INTRODUCTION
C-1.
SCOPE.
This appendix lists components of end item and basic issue items for the Supplemental Petroleum Laboratory to help you
inventory items required for safe and efficient operation.
C-2.
GENERAL.
The Components of End Item and Basic Issue Items List are divided into the following sections:
a.
Section II, Components of End Items. This listing is for informational purposes only, and is not authority to
requisition replacements. These items are part of the end item, but are removed and separately packaged for
transportation or shipment. As part of the end item, these items must be with the end item whenever it is issued
or transferred between property accounts. Illustrations are furnished to assist you in identifying the items.
b.
Section III, Basic Issue Items. These are the minimum essential items required to place the Supplemental
Petroleum Laboratory in operation, to operate it, and to perform emergency repairs. Although shipped
separately packaged, BII must be with the Petroleum Laboratory during operation and whenever it is transferred
between property accounts. The illustrations will assist you with hard-to-identify items. This manual is your
authority to request/requisition replacement BII, based on TOE/MTOE authorization of the end item.
c.
Section IV, Basic Issue Items - Overpack Boxes. This section identifies items (excluding chemicals) packaged
inside each overpack box issued with Mod Lab B.
d.
Section V, Basic Issue Items - Chemicals - Overpack Boxes. This section identifies chemicals packaged inside
each overpack box issued with Mod Lab B.
e.
Section VI, Manuals. This section identifies Manual, Catalogs, and Publication issued with Mod Lab B.
C-3.
EXPLANATION OF COLUMNS.
The following provides an explanation of columns found in the tabular listing for Sections II and III:
a.
Column 1, Illustration Number (Illus Number). This column indicates the number of the illustration in which
the item is shown. An illustration number preceded by a dash (-) is not illustrated.
b.
Column 2, National Stock Number. Indicates the national stock number assigned to the item and will be used
for requisitioning purposes.
c.
Column 3, Description. Indicates the Federal item name, and if required, a minimum description to identify and
locate the item. The last line for each item indicates the CAGE (in parentheses) followed by the part number.
d.
Column 4, Unit of Measure (U/M). Indicates the measure used in performing the actual
operational/maintenance function. This measure is expressed by a two-character alphabetical abbreviation (e.g.
EA, IN, PR).
e.
Column 5, Quantity Required (Qty. Rqd.). Indicates the quantity of the item authorized to be used with/on the
equipment.
|
|