TM 10-6640-239-13
4-173/(4-174 blank)
INSTALL
Install Refrigerating Circulator and Brackets. See Figure 4-67.
a.
Install loop strap fastener (23), and strap (4) and secure with two rivets (22).
b.
Install loop strap fastener (21) and secure with two screws (17), washers (18), lockwashers (19), and nuts (20).
c.
Install bracket (16) and secure with three rivets (15).
d.
Install bracket (14) and secure with two rivets (13).
e.
Install bracket (12) and secure with two rivets (11).
f.
Install bracket (9) onto refrigerating circulator (1) and secure with three screws (10).
g.
Install refrigerating circulator (1) with bracket (9) and secure with two screws (5), washers (6), lockwashers (7), and
nuts (8).
h.
Secure refrigerating circulator (1) by tightening strap (4).
i.
Connect inlet and outlet coolant tubes (3) as tagged to refrigerating circulator (1) and tighten clamps (2). Discard
tags.
j.
Plug refrigerating circulator (1) into wall receptacle.
CALIBRATE
Refer to vendor manual for refrigerating circulator calibration procedures.
|
|
