TM 10-6640-239-13
4-129
4-56. OIL THIEF RACK.
This task consists of:
a.
Remove
b.
Install
INITIAL SET-UP
Tools Required
General Mechanics Tool Kit, (Appendix B, Section III, Item 1)
Portable Electric Drill, (Appendix B, Section III, Item 2)
Twist Drill Set, (Appendix B, Section III, Item 2)
Hand Blind Riveter, (Appendix B, Section III, Item 3)
Materials/Parts Required
Rivets, (6)
REMOVE
Remove Oil Thief Rack. See Figure 4-50.
a.
Remove two oil thief tubes (1).
b.
Remove four screws (2), washers (3), and oil thief rack (4).
c.
Remove three rivets (5) from each angle bracket (6) and remove angle bracket.
INSTALL
Install Oil Thief Rack. See Figure 4-50.
a.
Install angle bracket (6) and secure each angle bracket with three rivets (5).
b.
Install oil thief rack (4) and secure with four screws (2) and washers (3).
c.
Install two oil thief tubes (1).
|
|
